manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 69 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 69

Safety

Information about Personal Safety

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.2-25

0.0

Radiation protection equipment

A.2

Special equipment is part of the radiation protection regula-
tions.

A.2

Control area

A.2

The console is located outside the radiation control area. The 
patient can be observed through a lead glass window. The gan-
try and the patient table can be operated by remote control.

A.2

✧

When scanning, operate the system from the console 
whenever possible.

Radiation shielding

A.2

If scans have to be released from inside the control area or if 
accompanying personnel have to remain there, safety measures 
have to be taken (lead aprons, protective walls etc.).

A.2

Radiation warning lamps

A.2

A.2

The radiation warning lamps on the gantry operator panels, on 
the control box as well as site radiation warning lamps to be 
provided by the customer must light up if scanning has been 
triggered.

A.2

If a radiation warning lamp does not light up once a scan has 
been released, please contact Siemens Service.

A.2

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов