Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 309

Страница: 309 / 574

Operation

Switching the System On and Off

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.1-5

0.0

Login as a different user

D.1

If you wish to log onto the system as a different user (e.g., for
service reasons), you must interrupt automatic login.

D.1

✓

The application is running.

✧

Call up

System > End

in the main menu.

The

End Session

dialog box is displayed.

D.1

✧

Click on

Restart Application

and confirm your choice.

✧

Press the

Shift

key and keep pressed during application

startup.

The login dialog box is displayed.

D.1

✧

Enter a user name and, if necessary, a password and con-
firm your entries.

Booting is continued.

D.1

Passing the license check

D.1

Each time you start up the system the software checks whether
it is correctly installed.

D.1

✧

Check if the operating system starts up without displaying
a license error message.

f B

D.1

A license error occurs and an error message is displayed.

D.1

You cannot use the system due to an incorrect license number.

D.1

✧

Call Siemens Service.

D.1

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы:

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 309 / 574

Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы: