Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 267

Страница: 267 / 574

System Handling

Operation of the Gantry

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

C.1-3

0.0

Tilting the gantry backward
(negative direction)

C.1

C.1

✧

Press the upper button and hold it down as long as you
want the tilting movement to continue.

The gantry is inclined such that the top of it moves away from
the patient table (negative angle).

C.1

If the following positions have been reached, the tilting stops
automatically:

C.1

❏

Vertical position (0° position)

❏

Maximal positive or negative angle

❏

Final position defined by the current table position or scan
program

To continue movement release the button and press it again.

C.1

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы:

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 267 / 574

Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы: