manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 10 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 10

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Introduction

viii

syngo CT Operator Manual

0.0

The syngo CT Operator Manual (Volume 1 through Volume 5) is 
a workflow orientated description for operation of the system 
software. It comprises step-by-step instructions from registra-
tion to examination as well as evaluation and documentation of 
your examination results.

0.0

This Operator Manual is only valid in conjunction with the 
SOMATOM Emotion Operator Manual, and the safety instruc-
tions therein.

0.0

System Owner Manual

0.0

In this manual you will find the details and preconditions for the 
operation of your CT scanner:

0.0

❏

Information on 

correspondence

 with the authorities, on 

regulations

 and 

test protocols

❏

A listing of 

labels

 and 

technical data

❏

The Dosimetry and Imaging Performance Report

❏

Information on 

maintenance

 and 

disposal

Release Note

0.0

The Release Note includes latest product and software informa-
tion. Here you will find recommendations on parameter set-
tings and hints of the latest revision of the currently delivered 
product.

0.0

The release note is one part in the operator manual. But it is 
delivered separately. You can either print out and file it or access 
it online via the 

Life 

task card.

0.0

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов