manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 92 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 92

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Mechanical Safety

Safety

A.3-10

Limitation of liability

A.3

As the manufacturer, assembler, installer or importer of the sys-
tem, Siemens does not accept liability for the safety functions, 
reliability or performance of the system, if one of the following 
circumstances applies:

A.3

❏

Installation, upgrade, readjustment, modification, repair or 
upgrading by persons not authorized to do so by Siemens.

❏

Components not properly replaced by the original parts 
from Siemens.

❏

Electrical installation in the CT room that does not comply 
with the requirements of VDE standard 0107 or other bind-
ing codes of practice.

❏

Operation of the system in a way which deviates from the 
instructions given in these manuals.

Certificate of conformity

A.3

We therefore recommend that you obtain a certificate of con-
formity containing the following information:

A.3

❏

Type, extent and date of the work performed on the sys-
tem.

❏

Names of all those involved in the work (and their compa-
nies)

❏

Their signatures.

B

.3

A

Please note that this does 

not

 imply that the repairs are author-

ized. Siemens does 

not

 accept liability for repairs that are car-

ried out without our written permission.

A.3

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов