manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 35 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 35

Safety

General Safety Information

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.1-13

0.0

Caution with liquids, chemi-
cals, heavy objects and food

A.1

Food and drinks 

must not

 be consumed in the vicinity of the 

console or placed on the console.

A.1

In particular near the console (keyboard, control box), you must 
be careful with liquids and food. They can get into the equip-
ment and cause malfunctions.

A.1

Don’t put chemicals, liquids, heavy objects in the storage com-
partment on right side of the gantry.

A.1

A.1

A.1

A.1

CAUTION

A.1

Fluids in keyboard or control box!

A.1

Undesired radiation.

A.1

✧

Keep liquids (e.g., coffee) and food away from the equip-
ment.

A.1

CAUTION

A.1

Chemicals, liquids, heavy objects in the storage compartment!

A.1

Risk of injury.

A.1

✧

Don't put chemicals, liquids, heavy objects in the storage 
compartment.

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов