manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 345 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 345

Operation

Positioning the Patient

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.3-5

0.0

Patient weight 

D.3

Patients weighing up to 140 kg (300 lbs) can be examined with-
out any restriction.

D.3

Patients weighing up to 200 kg (440 lbs) can be positioned on 
the table and examined. The stability of the patient table is not 
at risk. Yet, the correct functioning of the table (lift, positioning 
precision) cannot be guaranteed 100%.

D.3

✧

Be especially careful when positioning heavy patients on 
the table.

✧

Before you start the examination convince yourself that the 
patient is not endangered either by the movement of the 
table or by the tilt of the gantry.

Problematic patients

D.3

Special caution is required with obese, unconscious, apathetic, 
unresponsive or pediatric patients.

D.3

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов