manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 343 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 343

Operation

Positioning the Patient

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.3-3

0.0

Artifacts

D.3

When positioning the patient, please ensure that the object of 
interest is as near to the center of the measuring field as possi-
ble. If it is not, image artifacts may appear on subsequent recon-
structions, such as MPR, 3D etc.

D.3

✧

Reconstruct an overview image if streaky artifacts impair 
the image quality.

This makes it easier to find the causes of the streaks and to avoid 
them (e.g., residual contrast medium, hair clips etc.).

D.3

Examination limits

D.3

The markings on the table top and positioning mat mark the 
metal-free area of the patient table.

D.3

✧

If necessary, reposition the patient.

Patient comfort

D.3

The patient should be positioned comfortably in an anatomi-
cally correct position in the middle of the table top. 

D.3

✧

Use positioning aids, if necessary.

This makes it easier for the patient to rest calmly during the 
examination.

D.3

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов