Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 347

Страница: 347 / 574

Operation

Positioning the Patient

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.3-7

0.0

D.3

The positioning mat has to be fastened onto the table top so
that its position marker is aligned with the corresponding
marker of the table top.

D.3

The positioning mat must be correctly secured.

D.3

We recommend covering the mat with paper, e.g., with HOST-
ESS paper cloths No 75312. Length 50 m, width 60 cm, perfo-
ration every 28 cm.

D.3

✧

Use any positioning accessories which might be
necessary.

(→

Page D.3-17

Using standard accessories

) ,

(→

Page D.3-26

Using optional accessories

)

Preparing the patient

D.3

✧

Jewelry, glasses, prostheses etc. must be removed from the
body region to be examined.

✧

Now position the patient on the table using the necessary
accessories.

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы:

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 347 / 574

Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы: