Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 407

Страница: 407 / 574

Operation

Accessories for Patient Positioning

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.4-23

0.0

Safety instructions

D.4

Warning label: Insert pads

D.4

D.4

Use of insert pads

D.4

Increased risk of the head of the patient hitting the gantry

D.4

✧

Always watch the patient while the table is moving - espe-
cially if the gantry is tilted.

D.4

Do not use surgical spirit for cleaning. It could cause the surface
material to become wrinkled.

D.4

Please note that the shape and dimensions of the head support
may result in restrictions in operation.

D.4

Using the cushion set

D.4

✧

Attach the head holder to the head end of the table for
positioning the head.

✧

Place the flat cushion or one of the head cushions in the
head holder.

✧

Position the patient’s head in the desired position and
immobilize the head with the pads on both sides.

✧

Run the restraint strap over the forehead of the patient and
fasten it at the head support with the Velcro straps.

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы:

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 407 / 574

Результаты поиска

Содержание SOMATOM Emotion syngo CT 2007E

Отзывы: