manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Руководство оператора, Страница: 47 / 574

Поделиться
Скачать
Siemens SOMATOM Emotion syngo CT 2007E Скачать руководство пользователя страница 47

Safety

Information about Personal Safety

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.2-3

0.0

Ruling out collisions

A.2

The patient must be positioned in such a way that he or she can-
not collide with or be injured by table top movements or the tilt-
ing movement of the gantry.

A.2

✧

Immobilize the arms of the patient with the straps supplied 
to rule out collisions and injury to the hands under the 
table top.

✧

With obese patients, make sure that no collision occurs.

A.2

A.2

CAUTION

A.2

Improper patient positioning!

A.2

Crushing of patient between gantry and table.

A.2

✧

Ensure that neither the patient¡¯s clothing nor hair can get 
caught in moving mechanical parts.

✧

It is very important to ensure that infusion lines and respi-
ration tubes, catheters and ECG cables cannot get caught in 
moving parts. These components must not be put under 
tensile stress in any way.

✧

Make sure that patient bedding cannot get caught by mov-
ing parts of the patient table.

✧

Use positioning aids as described.

Содержание SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов