manualshive.com logo in svg

Siemens SIREMOBIL Iso-C, Инструкция по эксплуатации, Страница: 63 / 128

Поделиться
Скачать
Siemens SIREMOBIL Iso-C Скачать руководство пользователя страница 63

Adjustments / Programs

5 - 27

Siemens AG

 

SPR2-230.061.01

Page 27 of 30

SIREMOBIL Iso-C

Medical Solutions

Rev. 13

12.04

CS PS 24

System Manual

 

Move text positions

Allows you to configure the position of superimposed text.

Date / Time format

European: TT MM JJ / HH MM

US:

MM DD YY / HH MM

System configuration

Allows you to read out the current MEMOSKOP configura-
tion.

Keyboard

Allows you to program the corresponding keyboard layout 
Universal / Roman. 

Graphics level

Level (brightness) of superimposed text.
(Default: 128)

Display of real time clock

Yes: Real time clock (date and time) are displayed depend-
ing on the User setup programming for MEMOSKOP. 
The real time clock is active.
NO: The real time clock is switched off. The User setup pro-
gramming will not affect it.

Display of rotated images

Yes: When pressing the image rotation key, the current 
image will be computerized and displayed.
NO: The rotated image will not be computerized when 
pressing the image rotation key. For SIREMOBIL Iso-C 
always set to YES.

Product name

Allows you to change the MEMOSKOP name, displayed 
during system booting. 
Enter SIREMOBIL Iso-C. 

Diagnostics

Allows you to invoke test routines for repair by the manu-
facturer of the MEMOSKOP.
The MEMOSKOP can be reset via "Load factory default", 
as required. Subsequently you have to program accord-
ingly. The same applies if you replace the MEMOSKOP

Create External Disk (1)

MEMOSKOP CE and MEMOSKOP CE-100:
Program the value to "No".
All other types of MEMOSKOP:
If a MOD drive is implemented and/or the option 
"3D Reconstruction" is installed and/ or the option DICOM 
Bridge. Is installed, program the value to "Yes".

Enable Bridge (1)

MEMOSKOP CE and MEMOSKOP CE-100:
Program the value to "No".
All other types of MEMOSKOP:
If a MOD drive is implemented and/or the option 
"3D Reconstruction" is installed and/or the option DICOM 
Bridge. Is installed, program the value to "Yes".

Delay 3D-PC/ DICOM 
Bridge (1)

Only available if option "3D Reconstruction" is installed. 
Configure 120.

Interface to 3D-PC

Only available if option "3D Reconstruction" is installed.
Configure Yes.

Function:

Comments:

Содержание SIREMOBIL Iso-C

































































































































Отзывы:

Нет отзывов