manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Инструкция по эксплуатации, Страница: 69 / 86

Поделиться
Скачать
Siemens SIREMOBIL Compact L Скачать руководство пользователя страница 69

Replacing boards / replacing components

6 - 17

Siemens AG

 

SPR2-130.061.02

Page 17 of 28

SIREMOBIL Compact

Medical Solutions

Rev. 11

09.04

CS PS 24

System Manual

 

MEMOSKOP C-E 100

6

•

Replace the MEMOSKOP C-E 100.
The attachment screws are accessible on the underside of the storage device.

•

Check the software status of the MEMOSKOP. Download the system software status to 
the MEMOSKOP if necessary.

•

Use the MEMOSKOP Service Software to import the language file.

•

Set the MEMOSKOP C-E 100 to the correct video frequency and configure it for the 
number of existing monitors.
Refer to Chapter 5 "Configuring the video frequency " and "MEMOSKOP - Configuration 
for the number of existing monitors".

•

Configure the following parameters in Technical Setup for MEMOSKOP:

Check the software status of the newly delivered MEMOSKOP. 
If the software status of the MEMOSKOP differs from that of the 
system, the system software status must be downloaded to the 
MEMOSKOP. The MEMOSKOP software status is displayed in the 
2nd line of the User Setup. The first number describes the 
MEMOSKOP type (2=CE; 3=CE-100/ C/ C & MOD; 4=C-SUB/ C-SUB 
& MOD).

The image storage MEMOSKOP C-E 100 is a new image storage 
that works only with the correct number of images. For this rea-
son, if the image storage was set to it's default values 
(Menu "Diagnostics," "Load Factory Defaults"), the parameter 
"Maximum image numbers" must be set to 100 images.

Read and record the parameters for MEMOSKOP C-E 100 if you 
can select User setup. After replacing the MEMOSKOP, configure 
the MEMOSKOP C-E 100 according to the parameters noted.

Number of monitors

Configure 1 for SIREMOBIL Compact with 1 monitor.
Configure 2 for SIREMOBIL Compact with 2 monitors.

Hardcopy 

Check whether 5000 is programmed in "4 Max Hard-
copy time". If not, program this value.

Edge 1 coef set

Check whether 3 is programmed, If not, program this 
value.

Edge 2 coef set

Check whether 8 is programmed, If not, program this 
value.

Motion detection setup

Check whether the following are programmed "MD1: 
Threshold" 100 and for "MD2: Threshold" 120. If not, 
program these values.

Date / Time format

Set the country-specific format.

Keyboard

Set to the keyboard layout being used.

Language

Set for language of the country.

NOTE

NOTE

Содержание SIREMOBIL Compact L























































































Отзывы:

Нет отзывов