manualshive.com logo in svg

Siemens SIREMOBIL Compact L, Инструкция по эксплуатации, Страница: 50 / 86

Поделиться
Скачать
Siemens SIREMOBIL Compact L Скачать руководство пользователя страница 50

SIREMOBIL Compact

 

SPR2-130.061.02

Page 28 of 30

Siemens AG

System Manual

Rev. 11

09.04

CS PS 24

Medical Solutions

5 - 28

Adjustments / Programs

 

Create External disk (1)

MEMOSKOP CE and MEMOSKOP CE-100:
Program the value to "No".
All other types of MEMOSKOP:
If a MOD drive is implemented and/or the option DICOM 
Bridge is installed, program the value to "Yes".

Enable Bridge (1)

MEMOSKOP CE and MEMOSKOP CE-100:
Program the value to "No".
All other types of MEMOSKOP:
If a MOD drive is implemented and/or the option DICOM 
Bridge is installed, program the value to "Yes".

Default programs change-
able

Default: Yes
The organ programs can be protected against changes by 
setting "No".

Default LUT

After switch-on, the programmed brightness/contrast 
curve (LUT) is selected automatically. 
Default: LUT 2

Default LUT for Subtraction

After switch-on, the programmed brightness/contrast 
curve (LUT) is selected automatically for the subtraction 
mode, when equipped with a MEMOSKOP C-SUB.
Default: LUT 1

Default Edge

After switch-on, the programmed edge enhancement is 
selected automatically. Default: Edge 1

Software backward compa-
tible

Not implemented "Must be set to No".

Unit serial number

Enter the serial number of the SIREMOBIL Compact if it is 
equipped with a Dicom bridge. The serial number is 
required for identifying the images transferred. Please 
note that you have to omit the leading 0 when entering the 
serial number. 

Disable doserate selection 
in user Setup

Set to "Yes" for SIREMOBIL Compact without an area 
dose product measurement device.
Set to "No" for SIREMOBIL Compact with an area dose 
product measurement device. 

Subtraction K-factor, 
phase A

Noise suppression, phase A, is programmed in the SUB- 
mode. 
Phase A: Mask acquisition.

Subtraction K-factor, 
phase B

Noise suppression, phase B, is programmed in the SUB 
mode.
Phase B: Acquisition of fill image.

Subtraction Time of phase A

The time of phase A in the SUB-mode is programmed. 
Phase A: Mask acquisition.

Roadmap K-factor, phase A

Noise suppression, phase A, is programmed in the road-
map mode.
Phase A: Mask acquisition.

(1) in menu Diagnostics

Function:

Comments:

Содержание SIREMOBIL Compact L























































































Отзывы:

Нет отзывов