Siemens SINAMICS V20 Inverter, Руководство по эксплуатации

Страница: 61 / 426

Commissioning via the built-in BOP
5.1 The built-in Basic Operator Panel (BOP)
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
59
Digit-by-digit editing can be performed on parameter numbers, parameter indexes, or
parameter values. This editing method is best suited when large changes are required to
parameter numbers, indexes, or values. For information about the converter menu structure,
refer to Section "Converter menu structure (Page 55)".
● In any edit or scroll mode, digit-by-digit editing is entered by a long press (> 2 s) on .
● The digit-by-digit editing always starts with the rightmost digit.
● Each digit is selected in turn by pressing .
● Pressing once moves the cursor to the rightmost digit of the current item.
● Pressing twice in succession exits the digit-by-digit mode without changing the item
being edited.
● Pressing on a digit when there are no further digits to the left saves the value.
● If more digits are required to the left, then these must be added by scrolling the existing
leftmost digit above 9 to add more digits to the left.
● Pressing or for over two seconds enters fast digit scrolling.
Example 1:
Editing parameter numbers Example 2:
Editing parameter indices
If a parameter is an array, edit indices
as illustrated below:
Example 3:
Editing parameter values