Siemens SIMOTION Скачать руководство пользователя страница 84

Страница: 84 / 186

Table 4-5

Start mode examples

Mode

Description

Display on cam track output

One cam track with different data is

given.
● Cam track 1 (A to C)

active cam track.

● Cam track 2 (1 to 3)

is activated.

Effective

immediately
(IMMEDIATELY)

● New cam track becomes active

immediately.

● Cam track output becomes inactive.
● Output cams 1, 2 and 3 are output.

Cam track output

inactive
(IMMEDIATELY_B

Y_CAM_TRACK_

OUTPUT_INACTI

VE)

● New cam track becomes active at a

cam track output of zero.

● Output cam A on the active track is

output completely.

● Output cams 2 and 3 are output.
● Output cam 1 is not output.

With next track

cycle
(NEXT_CAM_TRA

CK_CYCLE)

● Cam track is exchanged at the axis

reference position of the new cam

track.

● Example 1, position-based cam:

Position-based cam of the old track

is terminated.

● Example 2, time-based cam:

New cam track becomes active with

the first output cam of the new track,

at the latest. Up to that point, time-

based cams remaining from the old

cam track are still output.

(QGRIFDPWUDFN

([DPSOH

Stop mode
The stop mode (stopMode) is used to define the behavior of the cam track on deactivation.
The mode is defined either as part of the cam track configuration in the Default window, or

directly as a default setting using the _disableCamTrack command.

Table 4-6

Types of stop mode

Stop mode

Description

Effective immediately (default)
(IMMEDIATELY)

Track is deactivated immediately. If an output cam (or time-based cam) is defined or

active at the current position of the track, the output of output cam is aborted.

Immediately when cam track

output inactive
(IMMEDIATELY_BY_CAM_TRA

CK_OUTPUT_INACTIVE)

If no single output cam is active (any longer), the active cam track is stopped. An active

(output) single output cam is still output completely.

Cam Track TO - Part II
4.2 TO Cam Track basics

Output Cams and Measuring Inputs

Function Manual, 04/2014

Содержание SIMOTION



























































































































































































Результаты поиска

Содержание SIMOTION

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIMOTION, Руководство по эксплуатации функций

Результаты поиска

Содержание SIMOTION

Отзывы:

Бренды по названию

Популярные бренды