Module Spectrum
S5-95F
A.2
Programmable Controller
Technical Specifications S5-95F
(6ES5 095-8FA02)
Dimensions and Weight
Dimensions WxHxD (in mm)
145×135×146
(in in.)
5.7 × 5.3 × 5.7
Weight - S5-95F
approx. 1.5 kg (3.3 lbs.)
Weight - memory submodule approx. 0.1 kg (3.5 oz.)
Internal Technical Specifications
Memory capacity
- internal RAM
16 KB, 8 KB for
control program
- EPROM submodule
Clock
- accuracy t
g
±1 s/day at 25 °C
(77 °F)
- variation due to temp. change t
A
0 to 60 °C
(32 to 140 °F)
Execution time
- per binary operation
approx. 2
µ
s
Cycle monitoring time
- defined via hardware
approx. 680 ms
- programmable via software
10 to 2550 ms
Flags
2048, (512 retentive)
Timers number/range 128;
0.01 to 9990 s
Counters number/range 128;
0 to 999 (8 retentive)
Inputs/outputs (onboard)
Digital inputs, failsafe
16
Digital outputs
- failsafe
8
- single-channel
2×4
Interrupt inputs, failsafe
4
Counter inputs, failsafe
2
External I/O modules
Digital modules
max.
32
Analog modules
max.
8
Permissible blocks
Organization blocks
1, 2, 3, 13, 21, 22,
31, 34, 37, 251
Program blocks
0 to 255
Function blocks
0 to 255
- integrated
240 to 243, 250 to
252, and 255
Sequence blocks
0 to 255
Data blocks
1 to 255
- reserved
1, 252 to 255
Operation set
approx. 140
Output current
- from V 1
1 A
- from V 1
0.65 A
Short-circuit protection
electronic
Class of protection
Class I
Floating
no
Back-up battery
Lithium battery
(3.4 V/850 mAh)
- life expectancy
min.
1 year
- service life (at 25 °C/77° F) approx. 5 years
Power loss of the module
typ.
12 W
Power Supply (Internal)
Input voltage
- rated value
24 V DC
- permissible range
20 to 30 V
Current consumption from 24 V
- for the subunit
typ.
160 mA
- for full external I/O
configuration
typ.
1 A
Output voltage
- V 1 (for external I/O)
+9 V
- V 2 (for programmer)
+5.2 V
Specific Onboard I/O Specifications
For digital inputs:
Floating
yes
- isolated in groups of
16
Input voltage
- rated value
24 V
- at "0" signal
- 30 V to +5 V DC
- at "1" signal
+13 V to +30 V DC
Input current
- at "0" signal
<1.5 mA (Input
residual current,
2-wire BERO)
- at "1" signal
<6.5 mA (at 30 V)
Delay time
- from "0" to "1"
typ.
2.5 ms
- from "1" to "0"
typ.
2.0 ms
Cable length unshielded
max.
200 m (660 ft.)
For digital outputs:
Floating
yes
- isolated in groups of
16
Load voltage L+
- rated value
24 V DC
- permissible range
20 to 30 V DC
(including ripple)
Output current for "1" signal
- failsafe outputs
max.
0.75 A
- single-channel outputs
max.
0.5 A
Lamp load
max.
10 W
Residual current for "0" signal
50
µ
A
Output voltage
- for "0" signal
max.
0.5 V (at 6 k
load
resistance)
- for "1" signal
max.
L+- 0.5 V
(at
0.75 A/0.5A and
24 V DC)
Short-circuit protection
electronic and
(not overload-resistant)
thermal
Limitation of the voltage in-
duced on circuit interruption
- for failsafe outputs
to
- 11 V
- for single-channel outputs
to
- 16 V
Switching frequency
- resistive load
max.
100 Hz
- inductive load
max.
2 Hz
A-2
EWA 4NEB 812 6210-02
