Siemens SIMATIC RF300, Системное руководство

Страница: 455 / 474

Note
LED reaction of the readers in MOBY I mode
Errors are not displayed on the reader. These are only displayed via the connected CM.
In the "None present" mode, the LED of the reader stays blue until initial access (read/write/init)
to the transponder takes place. While no other access is initiated, the LED flashes green.
Design of the Y adapter
With the aid of the Y adapter (article number 6GT2090-4VE00) a slow migration of a MOBY I
application to RF300 is possible. The Y adapter is mounted in the vicinity of a MOBY I SLG. It
forwards signals of a communication module both to the MOBY I SLG and to the RF300 reader
to be newly installed. The transponder commands are handled either with a MOBY I transponder
or with an RF300 transponder. To do this, no change to the MOBY I application is necessary.
①
ASM TxD
(X1)
Connector for the communication module;
SLG plug, 6-pin acc. to EN 175201-804
②
Power
(X4) Optional 24 VDC supply voltage;
M12 plug, 4-pin
③
MOBY l
(X2)
Connector for the MOBY I-SLG;
SLG socket (angled), 6-pin acc. to EN 175201-804; cable length: 2 m
④
SIMATIC
RF300
(X3) Connector for RF 300 reader;
M12 socket, 8-pin, cable length: 2 m; max. 2 m cable extension permitted
Figure A-11 Connection graphic of the MOBY Y adapter for MOBY I
The operational statuses of the Y-adapter are displayed by four LEDs. The LEDs can adopt the
colors yellow and green and the statuses off , on , flashing :
Labeling LED Description
ASM TxD
(X1) No communication module connected to the Y-adapter.
A communication module is connected to the Y-adapter.
Appendix
A.2 Accessories
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
455