Siemens SIMATIC FM 453, Руководство пользователя

Страница: 253 / 380

9-53
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
9.3.12 Active NC Block (Job No. 103), Next NC Block
(Job No. 104)
... are display data in “Automatic” mode
/ Skipped block
L Subprogram callup (fills in UP number)
P Number of callups for subprogram (fills in UP callup
number)
X/t Position/dwell time programmed (fills in value 1)
G1-G3 G function group 1-3
D Tool offset value number
M1-M3 M function group 1-3
F Speed programmed (fills in value 2)
Byte
Data
Bit
Byte
Format
7 6 5 4 3 2 1 0
0 Byte NC program number
1 Byte NC block number
2 8-bit / L P X/t 0 G3 G2 G1
3 8-bit 0 0 0 D M3 M2 M1 F
4 Byte G function 1
5 Byte G function 2
6 Byte G function 3
7 Byte 0
8 DINT 32-bit value 1 (UP number, bytes)
12 DINT 32-bit value 2 (UP callup number, bytes)
16 Byte M function 1
17 Byte M function 2
18 Byte M function 2
19 Byte D function
as described in “active NC block”
Active NC Block
Next NC Block
Description of Functions