Siemens SIMATIC FM 453, Руководство пользователя

Страница: 243 / 380

9-43
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
You can use this command to delete a residual distance that remains after a
job has been canceled.
S
It is effective only in the “Incremental Relative”, “MDI”, and “Auto-
matic” modes after a stop. If processing is not interrupted with a stop, the
Delete Residual Distance requirement is suspended in the FM 453.
S
On starting after a Delete Residual Distance in MDI mode, the active
MDI block is processed from the start.
S
On starting after a Delete Residual Distance in Incremental Relative and
Automatic modes, processing continues with the following block.
This command is described in Section 9.2.6.
This command is described in Section 9.2.6.
You can use this command to reset the axis.
S
The setpoint output is interrupted.
S
The instantaneous processing status is canceled, and synchronization in
incremental encoders is deleted.
S
Active compensation values are deleted.
S
An acknowledge signal is issued for all errors.
You can use this command to reset coordinates modified with the functions
“Set actual value” and “Set actual value on-the-fly” to their original value (if
the axis is not in motion).
Delete Residual
Path
Automatic Block
Search Forward
Automatic Block
Search Backward
Restart
Undo Set Actual
Value
Description of Functions