Siemens SIMATIC FM 453, Руководство пользователя

Страница: 123 / 380

6-27
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Table 6-5 User DB for the FM 453, continued
Abso-
lute Ad-
dress
Comments
Initial
Value
Data Type Variable
Decla-
ration
Relative
Address
28.3 +0.3 OT_ERR BOOL FALSE Operator control and guidance
errors
28.4 +0.4 DATA_ERR BOOL FALSE Data error
28.5 +0.5 FM_NSTQ BOOL FALSE Reserved
28.6 +0.6 FM_NST BOOL FALSE Reserved
28.7 +0.7 PARA BOOL FALSE Parameterized
29.0 +1.0 START_EN BOOL FALSE Enable start
29.1 +1.1 WORKING BOOL FALSE Processing in progress
29.2 +1.2 WAIT_EN BOOL FALSE Wait for external enable
29.3 +1.3 BIT1_3 BOOL FALSE Reserved
29.4 +1.4 BIT1_4 BOOL FALSE Reserved
29.5 +1.5 DT_RUN BOOL FALSE Dwell time in progress
29.6 +1.6 PR_BACK BOOL FALSE Program processing in reverse
29.7 +1.7 BIT1_7 BOOL FALSE Reserved
30.0 +2.0 MODE BYTE B#16#0 Active operating mode
31.0 +3.0 SYNC BOOL FALSE Synchronized
31.1 +3.1 MSR_DONE BOOL FALSE End measurement
31.2 +3.2 GO_M BOOL FALSE Go_minus
31.3 +3.3 GO_P BOOL FALSE Go_plus
31.4 +3.4 BIT3_4 BOOL FALSE Reserved
31.5 +3.5 FAVEL BOOL FALSE Flying actual value done
31.6 +3.6 BIT3_6 BOOL FALSE Reserved
31.7 +3.7 POS_ROD BOOL FALSE Position reached, Stop (“PEH”)
32.0 +4.0 NUM_MF BYTE B#16#0 M function no.
33.0 +5.0 BIT5_0 BOOL FALSE Reserved
33.1 +5.1 BIT5_1 BOOL FALSE Reserved
33.2 +5.2 BIT5_2 BOOL FALSE Reserved
33.3 +5.3 BIT5_3 BOOL FALSE Reserved
33.4 +5.4 STR_MF BOOL FALSE Change M function
33.5 +5.5 BIT5_5 BOOL FALSE Reserved
33.6 +5.6 BIT5_6 BOOL FALSE Reserved
33.7 +5.7 BIT5_7 BOOL FALSE Reserved
34.0 +6.0 WORD6 WORD W#16#0 Reserved
Programming the FM 453