Siemens SIMATIC BATCH, Руководство по эксплуатации

Страница: 537 / 1158

Special system characteristics for monitoring
If you use the "Start" or "Restart" command in a command step at a recipe element that is
monitored, the monitoring is started as well.
Inserting a command step
To insert command steps in the diagram in the recipe editor, follow the steps below:
1. Select the menu command Insert > Command step or the corresponding icon of the toolbar.
2. Click on the required location in the open recipe until the mouse pointer shows the command
symbol to insert a command step.
3. Open the properties dialog of the command step. The command step is configured in the
"General" tab.
4. Select the desired targets from the command targets offered. In the tree view, navigate to
the desired recipe element and use the arrow key to move it in the list of command targets.
Alternatively, you can select the target object in the recipe editor and, keeping the left mouse
button pressed, drag it to the required command step object and then release the left mouse
button.
5. Select your command from the list of available commands.
6. If you only want to sent a command for a specific status, under "Filter" select the status that
the recipe phase must have during runtime for the corresponding command to be passed.
7. Close the dialog with "OK".
Additional information
"General" tab command step properties (Page 824)
Example of a command step (Page 537)
10.4.5.6 Example of a command step
Introduction
In automatic mode, process conditions may require that one recipe object is influenced by
other recipe objects.
BATCH Recipe Editor
10.4 Creating recipes
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
537