Siemens SIMATIC BATCH, Руководство по эксплуатации

Страница: 824 / 1158

Additional information
Jump (Insert menu) (Page 548)
14.1.10.10 "General" tab (Command step properties)
Function:
You can configure the command step in the "General" tab of a command step. To pass an
ISA88 command to one or more recipe objects, you need to select a target step, the target
command to be passed and perhaps the status the target object should have.
Selecting target objects in the navigation area and transferring them to the command target list
Select the desired targets from the command targets offered. In the tree view, navigate to the
desired recipe element and use the arrow key to move it in the list of command targets. You
can select several targets. If you want to delete a target object from the list of command targets,
select it and click the left arrow key.
Command:
Select your desired command from the list of available commands. All available commands
are listed in the Shortcut menu commands (Page 1115) folder.
Note
The Restart command is a combination command and contains both the Reset and Start
commands.
Only commands applicable to the current target object status are permitted. See status
changes with recipe steps (Page 394).
Filter:
Under "Filter", select the status that the respective recipe phase should have in runtime so that
a command will be passed.
"Select all monitored" check box:
If you select this check box, all possible target objects arranged within your monitoring will be
listed. The check box is not shown if you do not use any command steps in monitored recipe
areas. The check box is cleared in the default setting.
Runtime
If a runtime is specified for the command step, the step retains the RUNNING status for this
period. Otherwise, it ends as soon as the command is sent.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
824
Operating Manual, 02/2016, A5E35958174-AA