Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 88 / 114

Chapter 6
CPE Management Interface
RUGGEDCOM WiN5100/WiN5200
User Guide
80 CPE Statistics
Field Description
Status Displays the Status. Sticky addresses remain in the table after a reboot. Non-Sticky
addresses are cleared from the table after a reboot.
Values: Sticky | Non-Sticky
Type Displays Self-Learned Entries.
Values: Self-Learned | Preprovisioned
5. In the Access List Table , you can add preprovisioned entries to the list. Self-learned entries appear in the
list automatically.
a. Click the button. A new row appears in the
Access List Table .
b. Type an IP address in the new row.
6. To remove a MAC Address, select a row and click the button. If no rows are selected, clicking the button
removes the last entry in the table.
7. Click the
Apply
button.
Section 6.4
CPE Statistics
This section describes how to:
• view general CPE system statistics. See
Section 6.4.1, “General Statistics” .
• view CPE hardware information. See Section 6.4.2, “Device Info” .
• view and clear CPE RF statistics. See Section 6.4.3, “RF Statistics” .
• view and clear network statistics. See Section 6.4.4, “Network Statistics” .
• view and clear service flow statistics. See Section 6.4.5, “Service Flow Statistics” .
Section 6.4.1
General Statistics
On the the
General Statistics
pane, you can review general CPE status and information. The
General Statistics
pane is read-only; there are no parameters to set on this pane.
Procedure: Viewing General Statistics
1. Click the Statistics button. The General Statistics pane appears.