Siemens RUGGEDCOM WiN5100 Скачать руководство пользователя страница 80

Страница: 80 / 114

Chapter 6

CPE Management Interface

RUGGEDCOM WiN5100/WiN5200

User Guide

Developer Mode

Field

Description

Local Time

Displays the local time advertised by the base station. The time appears automatically in this field, if set

in the base station.

4. Click the

Apply

button.

Section 6.2.12

Developer Mode

Use the

Developer Mode

pane to access Developer Mode.

Procedure: Accessing Developer Mode

1. Click the

Management

button. The

Management

options appear in the options pane.

2. In the options panel, click the

Developer Mode

link. The

Developer Mode

pane appears.

Figure 62: Developer Mode pane

3. In the

Password

field, type the password for Developer Mode. To obtain this password, contact Technical

Support.
The status of the password appears in the

Status

field. If the password is correct, the message "Correct

Password" appears in this field.

4. Click the

Apply

button.

Section 6.2.13

Ethernet Lock

If enabled, the Ethernet Lock function locks ethernet ports during certain events. The CPE will be automatically

locked during the following conditions:
• When Ethernet is down.
• During system start-up, with the following exceptions:

▪ A software exception – if the reason for the system reboot was a software exception, the CPE will not be

locked.

Содержание RUGGEDCOM WiN5100



















































































































Результаты поиска

Содержание RUGGEDCOM WiN5100

Отзывы:

Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 80 / 114

Результаты поиска

Содержание RUGGEDCOM WiN5100

Отзывы: