manualshive.com logo in svg

Siemens MOBY I ASM 421, Техническое описание

Поделиться
Скачать
Siemens MOBY I ASM 421 Скачать руководство пользователя страница 67

ASM 421 Technical Description

6GT2 097-3AH00-0DA2

– 65 –

RD: 03/02

6GT2 002-0DA00

ASM 421 / V.24

Subject to change without notice!

6GT2 002-0DB00

ASM 421 / RS422

6GT2 002-0DC00

ASM 421 / TTY

J31069-D0142-U001-A0-7618

C0 14:

The MDS memory cannot be written
– the MDS has a smaller memory than specified in the FORMAT command, i.e. enter the

correct parameters for this type of MDS

– the MDS memory is defective
– an EEPROM MDS has been written too often and has reached the end of its life

C0 15:

Address error. The address area of the MDS has been exceeded
– the MDS is not of the correct type

C0 16:

An ECC error has occurred. Data cannot be read from the MDS
– the MDS has lost its data (MDS defective)
– the MDS was not formatted by the ECC driver. Reformat the MDS
– an EEPROM MDS has reached the end of its life. The data has been lost. Replace the 

MDS

– The MDS left the field during the write access.  The MDS is not positioned correctly.

C0 17:

The file handler is not working correctly
– check command format and command sequence
– the ASM 421 hardware (firmware) is defective (faulty).

D0 01:

The file handler will only accept RESET commands
– the file handler has not yet been initialized by a RESET command
– this situation can only be remedied by a RESET command

D0 05:

The FORMAT, CREATE, ATTRIB, WRITE, UPDATE, COVER and QUEUE-WRITE com-
mands have been issued with incorrect parameters
– FORMAT with invalid volume name or MDS type
– CREATE with invalid file name
– invalid file attribute
– WRITE/UPDATE with length 0 (DLNG=0)
– QUEUE-WRITE with invalid option
– COVER with invalid user (Only 1 and 2 are valid.)

D0 07:

The data transferred by the LOAD command is incorrect:
– the data from DIR + FAT do not match the transmitted checksum.
– the DLNG is parameterized incorrectly in LOAD.
MOVE command: the DIR + FAT do not fit the checksum. A MOVE command cannot be car-
ried out. The data structure on the MDS may be faulty. 

 Format the MDS.

D0 09:

The RESET command has been transmitted to the file handler with incorrect  parameters
– check bytes 11 to 17 of the telegram as shown in section 3.4.15

D0 14:

WRITE command:

there is no longer enough memory available in the MDS. Not all the
data has been written to the MDS

CREATE command:

no data blocks can be reserved when creating a file. No more blocks

are free

D0 15:

The MDS could not be identified by the file handler. Reformat the MDS.

D0 18:

The physical address requested lies outside the file. There is an error in the FAT. Reformat
the MDS.

D0 22:

The MDS is protected by the COVER command. A write command (e.g. UPDATE, CREATE)
must not modify the memory structure and is therefore rejected.

Содержание MOBY I ASM 421







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды