Siemens MICROMASTER Vector MMV110 Скачать руководство пользователя страница 5

Страница: 5 / 30

G85139-H1751-U529-D1

4/8/99

IMPORTANT

WARNING

In order to ensure correct and safe operation, it is vital the following instructions are strictly

In order to ensure correct and safe operation, it is vital the following instructions are strictly
adhered to:

adhered to:

••

Operation of

Operation of a motor

a motor with a

with a higher nominal

higher nominal power than

power than the inverter

the inverter or a

or a nominal pow

nominal power

less than half that of the inverter is not allow

less than half that of the inverter is not allowed.

ed. The inverter must only be operated

The inverter must only be operated

when the nominal current in P083 exactly matches the motor rating plate nominal

when the nominal current in P083 exactly matches the motor rating plate nominal
current.

current.

••

The

The motor

motor data

data parameters

parameters must

must be

be accurately

accurately entered

entered (P080-P085) and

(P080-P085) and an

an auto-

auto-

calibration performed (P088=1)

calibration performed (P088=1) before the motor

before the motor is started.

is started. Unstable/unpredictable

Unstable/unpredictable

motor operation (eg. reverse rotation) may result if this is not done.

motor operation (eg. reverse rotation) may result if this is not done. If this instability

If this instability

occurs, the mains supply to the converter must be disconnected.

When using the analogue input, the DIP switches must be correctly set and the analogue input

When using the analogue input, the DIP switches must be correctly set and the analogue input
type selected (P023)

type selected (P023) before enabling the

before enabling the analogue input wi

analogue input with P006.

th P006. If this is not

If this is not done, the

done, the

motor may start inadvertently.

Содержание MICROMASTER Vector MMV110































Результаты поиска

Содержание MICROMASTER Vector MMV110

Отзывы:

Siemens MICROMASTER Vector MMV110, Руководство по эксплуатации, Страница: 5 / 30

Результаты поиска

Содержание MICROMASTER Vector MMV110

Отзывы: