manualshive.com logo in svg

Siemens micromaster 410, Руководство по эксплуатации, Страница: 69 / 84

Поделиться
Скачать
Siemens micromaster 410 Скачать руководство пользователя страница 69

Issue 04/02

9  Electro-Magnetic Compatibility

MICROMASTER 410    Operating Instructions
6SE6400-5EA00-0BP0

69

9 

Electro-Magnetic Compatibility (EMC)

9.1 

Electro-Magnetic Compatibility (EMC)

All manufacturers / assemblers of electrical apparatus which “performs a complete
intrinsic function and is placed on the market as a single unit intended for the end
user” must comply with the EMC directive EEC/89/336.

There are two routes for the manufacturer/assembler to demonstrate compliance:

9.1.1 Self-Certification

This is a manufacturer's declaration that the European standards applicable to the
electrical environment for which the apparatus is intended have been met. Only
standards that have been officially published in the Official Journal of the European
Community can be cited in the manufacturer's declaration.

9.1.2 

Technical Construction File

A technical construction file can be prepared for the apparatus describing its EMC
characteristics. This file must be approved by a ‘Competent Body’ appointed by the
appropriate European government organization. This approach allows the use of
standards that are still in preparation.

NOTE

However, MICROMASTER 410 is designed  to be used only by professional
endusers with EMC knowledge. It is not designed for users having no EMC
knowledge.
In any case this operating instructions cover sufficient information which enables
the professional enduser to implement from his side all measures to ensure
electromagnetical compatibility.

Содержание micromaster 410





















































































Отзывы:

Нет отзывов