manualshive.com logo in svg

Siemens micromaster 410, Руководство по эксплуатации, Страница: 36 / 84

Поделиться
Скачать
Siemens micromaster 410 Скачать руководство пользователя страница 36

3  Commissioning

Issue 04/02

MICROMASTER 410    Operating Instructions

36

6SE6400-5EA00-0BP0

3.2.4.1 

Commissioning with the Operator Panel

The Operator Panel (OP) provides access to the inverter
parameters and enables the user to customize the
settings of your MICROMASTER 410. The OP can be
used to configure several MICROMASTER 410 Inverters.
This is accomplished by using the OP to set the required
parameters and once the process is complete, then the
OP can be removed.

The OP contains a five-digit display that allows the user to
read and change parameter values. The OP does not
have the capability to store parameter information.

Table 3-2 shows the factory default settings for operation via the Operator Panel.

Notes

♦

  The OP motor control functions are disabled by default. To control the motor

via the OP, parameter P0700 should be set to 1 and P1000 set to 1.

♦

  The OP can be fitted to and removed from the inverter whilst power is

applied.

♦

  If the OP has been set as the I/O control (P0700 = 1), the drive will stop if the

OP is removed.

Table 3-2

Default settings for operation using the OP

Parameter

Meaning

Default

P0100

Operating Mode Europe/US

50 Hz, kW

P0307

Power (rated motor)

Dimension (kW (Hp)) depending on setting of P0100.
[default value depending on variant.]

P0310

Motor frequency rating

50 Hz (60 Hz) depending on setting of P0100.

P0311

Motor speed rating

1395 (1680) rpm; depending on setting of P0100.
[default value depending on variant]

P1082

Maximum Motor Frequency

50 Hz (60 Hz) depending on setting of P0100.

Содержание micromaster 410





















































































Отзывы:

Нет отзывов