Siemens Desigo RXB Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 476

Siemens Desigo RXB Скачать руководство пользователя страница 99

19/140

Siemens

RXB (KNX) Applications library

CLC and RAD description of functions for CC-02 CM110384en_03

Building Technologies

Definitions / Tools

28 Feb 2009

2)

T21 and T22 have the same effect in changeover applications.

4)

Only

for

RXB24.1/CC-02.

6)

If not used by the application.

7)

Operates only the I/Os of the controller in test mode, no bus actuators.

9)

Values are correct when read, but will not automatically be updated.

The positions can be selected with < (Enter).

•

The inputs are displayed

•

Outputs can be set via < (Enter) and + / –.

To exit test mode, press >- (Escape) 2 - 3 times (depending on the situation).

If no further button is pressed for 5 minutes, the controller automatically reassumes
Normal mode and all physical outputs are switched back.

Monitor and operate

Exit test mode

«
...
97
98
99
100
101
...
»

Содержание Desigo RXB





























































































































































































































































































































































































































































































Отзывы:

Нет отзывов