6/166
Siemens
RXB (KNX) application library
FNC Description of functions for FC-10, FC-11, FC-12
CM110385en_05
Building Technologies
Introduction
28 Feb 2009
1 Introduction
1.1
Validity of the documentation
Devices with production date up to approx.
December 2007
Devices with procuction date
from approx. January 2008
RXB21.1/FC-10
Æ
Index A
RXB21.1/FC-11
Æ
Index A
RXB22.1/FC-12
Æ
Index A
QAX34.3
Æ
Series A - C
RXB21.1/FC-10
Æ
Index B and higher
RXB21.1/FC-11
Æ
Index B and higher
RXB22.1/FC-12
Æ
Index B and higher
QAX34.3
Æ
Series D and higher
–
Documentation revisions _01 and _02 apply.
–
Use old device descriptions (for ACS) and old
product data (for ETS)!
–
Documentation revisions _03 and higher apply.
–
Use new device descriptions (for ACS) and new
product data (for ETS)!
1.2
Revision history
CM110385en_05 28.02.2009
•
7.1.3 Temperature averaging
•
8.5.5 Downdraft compensation
CM110385en_04 14.03.2008
•
5.3.3, 5.4.4 Presence detector
•
8.1.4 Offset in the case of mechanical actuators (3rd party)
•
10.1.3, 10.2.3 No dew point sensor in FNC
•
11.15.2 Alarm LTE: Alarm codes
•
13.9 Table "HandyTool enumerations"
CM110385en_03 30.11.2007
•
1 New section
•
1.7 Bus supply
•
2.6 Parameter upload / download
•
2.7 Periphery test
•
5 Room operation mode
•
6 Setpoint calculations
•
7.1 Temperature measurement
•
8.1.3 Heating/cooling output
•
8.1.4 Actuator type selection
•
8.1.6 Valve exercising feature
•
8.5 Floor heating: the control parameters are not optimized.
•
8.5.2 Downdraft compensation
•
8.7 Room supply air cascade control (FNC08): figure
•
9.2.1 Fan speeds and control
•
10 Master/Slave (window switch, presence detector, dewpoint sensor)
•
11.7 Disabling of the special functions
•
11.12 Emergence heating
•
11.17 Free inputs/outputs
•
11.18,Software-version, 11.19 Device status
•
13.1 Reset and startup response
•
13.2 LED flashing pattern
•
13.7, 13.8, 13.9 HandyTool parameters with page numbers and enumerations
•
14 FAQ