manualshive.com logo in svg

Siemens 6GA7202-2AA10-1BF1, Руководство по эксплуатации, Страница: 165 / 168

Поделиться
Скачать
Siemens 6GA7202-2AA10-1BF1 Скачать руководство пользователя страница 165

The SIMOTION  system consists of three components:

• Engineering System

• Runtime system

• Hardware platforms

The hardware platforms form the basis of Motion Control Systems SIMOTION. The application 
created with the Engineering System and the corresponding Runtime software modules can be 
used on different hardware platforms.

SIMOTION C

Motion Controller for analog, stepper, PROFIBUS and PROFINET drives.

SIMOTION C is the controller variant of the SIMOTION family with the proven design of 
SIMATIC S7-300. The modules of the SIMATIC S7 portfolio provide diverse options for modular 
expansion of SIMOTION C.

SIMOTION C240P

The Motion Controller is available in two variants:

• SIMOTION C240

• SIMOTION C240 PN

The C240 and C240 PN variants feature the same PLC and Motion Control performance, but 
differ with regard to their interfaces.

SIMOTION D

A Control Unit SIMOTION D is used for coordinated motion control tasks such as synchronous 
operation, electronic gearing, cams, or complex electronic functions.
The SIMOTION D control units are available in several performance variants.

SIMOTION D435-2 DP/PN

SIMOTION D435-2 DP/PN for controlling up to 32 axes

SIMOTION Scout

Scout is the software package for configuring and programming SIMOTION automation systems.

Slave

The device configured as slave in a communications system receives data from the device 
configured as master. The slave is always the passive partner.

Glossary

SIMOCRANE CenSOR
Operating Instructions, 07/2021

163

Содержание 6GA7202-2AA10-1BF1









































































































































































Отзывы:

Нет отзывов