Siemens 6GA7202-2AA10-1BF1 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 168

Siemens 6GA7202-2AA10-1BF1 Скачать руководство пользователя страница 12

WARNING

Electric shock due to equipment damage

Improper handling may cause damage to equipment. For damaged devices, hazardous
voltages can be present at the enclosure or at exposed components; if touched, this can result
in death or severe injury.
• Ensure compliance with the limit values specified in the technical data during transport,

storage and operation.

• Do not use any damaged devices.

2.2

General safety instructions relating to software

WARNING

Danger to life if the safety instructions and residual risks are not observed

If the safety instructions and residual risks in the associated hardware documentation are not
observed, accidents involving severe injuries or death can occur.
• Observe the safety instructions given in the hardware documentation.
• Consider the residual risks for the risk evaluation.

2.2.1

Malfunctions of the machine as a result of incorrect or changed parameter
settings

WARNING

Malfunctions of the machine as a result of incorrect or changed parameter settings

As a result of incorrect or changed parameterization, machines can malfunction, which in turn
can lead to injuries or death.
• Protect the parameterization (parameter assignments) against unauthorized access.
• Handle possible malfunctions by taking suitable measures, e.g. emergency stop or

emergency off.

Basic safety instructions
2.2 General safety instructions relating to software

SIMOCRANE CenSOR

10

Operating Instructions, 07/2021

«
...
10
11
12
13
14
...
»

Содержание 6GA7202-2AA10-1BF1









































































































































































Отзывы:

Нет отзывов