Siemens 6GA7202-2AA10-1BF1, Руководство по эксплуатации, Страница: 119 / 168

Firmware update
Use this function to update the firmware. Select the required update file (.sfw) and click "Start
update".
Note
The DISA bit must not be set during the firmware update
Make sure that the DISA bit is not set during the firmware update. This prevents an automation
system from changing the camera to "RUN" mode.
For more detailed information, refer to the displayed HTML page.
Note
Prior to the firmware update: Saving settings and programs
All settings and programs are lost during the firmware update. Make sure that you save all
settings and programs before running an update.
Following a prompt for confirmation, the camera restarts and boots in update mode. The camera
retains the IP address that it had when the function was activated. If applicable, the "DHCP" IP
mode is disabled for the duration of the update.
For more detailed information, refer to the displayed HTML page.
Factory settings
Use this function to reset the camera to the factory settings. All parameters will be reset to their
default values. All stored programs will also be deleted.
8.5.3 Adapt
In the "Adapt" menu, you can show hidden dialogs or hide dialogs automatically. Dialogs inform
you, for example, that changes have been executed successfully. In these dialogs, you have the
option of hiding the display of dialogs in the future. You can use this menu to reset these settings.
Hidden dialogs
Table 8-41 Hidden dialogs
Button Description
All Click this button to display all the hidden dialogs.
Program Click this button to display all the hidden dialogs in the "Program" menu.
Verification Click this button to display all the hidden dialogs in the "Verification" menu.
Settings Click this button to display all the hidden dialogs in the "Settings" menu.
Parameterization
8.5 Device
SIMOCRANE CenSOR
Operating Instructions, 07/2021
117