Siemens 6GA7202-2AA10-1BF1, Руководство по эксплуатации, Страница: 155 / 168

EMC
USA
Federal Communica‐
tions Commission Ra‐
dio Frequency Inter‐
ference Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communi‐
cations. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Shielded Cables Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Modifications Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
Conditions of Opera‐
tions This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CANADA
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Avis Canadien Cet appareil numérique de la classe b est conforme à la norme NMB-003 du
Canada.
AUSTRALIA
This product meets the requirements of the AS/NZS 3548 Norm (Class A).
A.3.2 ESD guidelines
Definition of ESD
All electronic modules are equipped with large-scale integrated ICs or components. Due to their
design, these electronic elements are highly sensitive to overvoltage, and thus to any
electrostatic discharge.
These electrostatic discharge sensitive components/modules are commonly referred to as ESD
devices. This is also the international abbreviation for such devices.
ESD modules are identified by the following symbol:
Appendix
A.3 Standards and certifications
SIMOCRANE CenSOR
Operating Instructions, 07/2021
153