Siemens 6GA7202-2AA10-1BF1, Руководство по эксплуатации, Страница: 103 / 168

Parameter Possible values Default Description
Cause
• Trigger
• Read OK
• Read NOK
• Read OK (all)
• Read NOK (all)
• Match OK
• Match NOK
• Save program
• Quality evaluation
good
• Quality evaluation
fair
• Quality evaluation
poor
• Read NOK
• Save program
Specify what causes an image to be saved.
For a detailed description of this parameter, see the
paragraph below this table.
Remove NOK picture of
a series with OK result ☐ / ☑ ☐ In "Scan" mode (or program sequence) and when
"Cause = Read NOK (all)", images that have already
been saved with this cause are removed from the di‐
agnostics buffer if successful processing takes place
within the series.
Note
Note that when diagnostics transfer is activated, diag‐
nostic images may already be transferred or prepared
for transfer before successful processing takes place.
These images are then transferred completely.
Record • Image
• ± 1 image Image • Image
If one or more of the causes selected above occurs,
the current image is saved.
• ± 1 image
Not only the current image but also the previous
and the next image are saved.
Buffer size 1 … 50 50 Defines the number of images that are to be buffered
in the diagnostics memory.
Note that you can increase the buffer size available for
the diagnostics transfer ("Settings" → "Communica‐
tion" → "Use" → "Diagnostics transfer") by reducing the
size of this buffer.
Report
Buffer type
• Ring
• Stack
Ring Type of buffer:
• Ring: When the buffer contains 15000 entries, en‐
tries 1, 2, ... are overwritten.
• Stack: When the buffer contains 15000 entries, no
further entries are made.
Match string frames ☐ / ☑ ☑ The command "Write match string" or "Write string
trigger synchronized" outputs received frames to the
diagnostic report.
Parameterization
8.4 Settings
SIMOCRANE CenSOR
Operating Instructions, 07/2021
101