Siemens 6FB1211-1AT10-7AT3 Скачать руководство пользователя страница 23

 

 

23 

 

For Resellers: In order to avoid infringements of the license conditions by the reseller or the buyer these instructions and license 

conditions and accompanying 

CD – 

if applicable 

have to be forwarded to the buyers.

 

License Conditions and 

Disclaimers

 for Open Source Software and 

other

 Licensed Software

 

In the product "SIDOOR ATE500E / MED280 ", Copyright Siemens AG, 2015 (hereinafter "Product"), the following Open Source Software is used either unchanged or in a form 

that we have modified, and additionally the other License Software noted below: 

 

Liability

 for Open Source Software

 

Open Source Software is provided free of charge. We are liable for the Product including Open Source Software contained in accordance with the license conditions applicable to the 

Product. Any liability for use of Open Source Software beyond the program flow intended for the Product is explicitly excluded. Furthermore, any liability for defects resulting from 

modifications to the Open Source Software by you or third parties is excluded. 
We do not provide any technical support for the Product if it has been modified. 

 

Please

 note 

the

 

following

 

license

 conditions and 

copyright

 notices 

applicable

 to Open Source Software and 

other

 License Software:

 

Component

 

Open Source Software  [Yes/No]

 

Acknowledgements

 

Copyright

 Information / 

File

 

ARM CMSIS Library (STM32F0xx) - 2.10 

NO 

 

LICENSE AND COPYRIGHT INFORMATION FOR COMPONENT 

ARM  CMSIS LIBRARY (STM32F0XX) – 2.10 

 

LICENSE CONDITIONS AND COPYRIGHT NOTICES

 

 

Commercial

 Software: ARM CMSIS 

Library

 (STM32F0xx) – 2.10

 

 

Enclosed you'll find the license conditions and copyright notices applicable for Commercial Software ARM CMSIS Library (STM32F0xx) – 2.10 

 

License conditions:

 

ARM Limited (ARM) is supplying this software for use with Cortex-M processor based microcontrollers. This file can be freely distributed within development tools that are 

supporting such ARM based processors. 

@par 

THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. 

ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. 

BSD 3-clause 

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 

1)

 

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 

2)

 

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials 

provided with 

the distribution. 

3)

 

Neither the name of the ORGANIZATION nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior  written 

permission. 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

 

Copyrights:

 

(C) COPYRIGHT 2012 STMicroelectronics 

Copyright (C) 2010 ARM Limited 

Copyright © ARM Ltd 

(C) COPYRIGHT STMicroelectronics 

Copyright (C) 2010-2011 ARM Limited 

Copyright © ARM Ltd801176 

(c) Copyright Atollic AB. 

Copyright (C) 2011 ARM Limited 

 

Copyright (C) 2009-2011 ARM Limited 

Copyright 2011-2012 Altium BV 

 

 

 

 

Technische Änderungen vorbehalten. Zum späteren Gebrauch aufbewahren. 

©

 

Siemens AG 2014 - 2017

 

Subject to change without prior notice. Store for use at a later date. 

Содержание 6FB1211-1AT10-7AT3
























Отзывы: