manualshive.com logo in svg

SICK ZIRKOR200 Ex-G, Руководство по эксплуатации

Поделиться
Скачать
SICK ZIRKOR200 Ex-G Скачать руководство пользователя страница 16

16

8024250/18HT/V2-0/2020-12| SICK

O P E R A T I N G   I N S T R U C T I O N S   |  ZIRKOR200  Ex-G

Subject to change without notice

2

FOR YOUR SAFETY 

2.4

Responsibility of user 

2.4.1

Designated users

see “User qualification”, page 8

The ZIRKOR200 Ex-G should only be installed and operated by skilled technicians who, 
based on their technical training and knowledge as well as knowledge of the relevant 
regulations, can assess the tasks given and recognize the hazards involved.

2.4.2

Correct project planning

This Manual presumes that the device has been delivered as specified during project 
planning (i.e., based on the SICK application questionnaire) and the relevant delivery state 
of the device (delivered System Documentation).

▸

If you are not sure whether the device complies with the planned configuration or the 
delivered system documentation: 
Contact SICK Customer Service.

2.4.3

Correct use

▸

Only use the ZIRKOR200 Ex-G as described in these Operating Instructions (

see 

“Intended use”, page 13

). The manufacturer bears no responsibility for any other use.

▸

Carry out the prescribed maintenance work (

see “Maintenance plan”, page 72

).

!

▸

Do not carry out any work on the ZIRKOR200 Ex-G not described in these Operating 
Instructions.
Do not remove, add or modify any components to or on the ZIRKOR200 Ex-G unless 
described and specified in the official manufacturer information.
Otherwise:
– Any warranty by the manufacturer becomes void. 
– The ZIRKOR200 Ex-G can become dangerous.
– The approval for use in potentially explosive atmospheres is no longer valid.

2.4.4

Special local conditions 

▸

Follow all local laws, regulations and company-internal operating directives applicable at 
the installation location.

2.4.5

Read the Operating Instructions

▸

Only put the ZIRKOR200 Ex-G into operation after reading and understanding the 
Operating Instructions.

▸

Observe all safety information.

▸

If anything is not clear: Contact SICK Customer Service.

These Operating Instructions must be:  

▸

Available for reference.

▸

Passed on to new owners.

Содержание ZIRKOR200 Ex-G





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды