7.10
Overview
Figure 70: Reference contour field
1
Tool for drawing reference contour fields
2
Drawn contour with tolerance band
3
Visible spatial contour
4
Configure the field
If you have activated the
Reference contour monitoring
option for a monitoring plane, the
dialog box is displayed. Draw the reference contour field based
on the values determined during project planning (
see "Reference contour monitoring",
).
The contour as reference field monitors a contour of the environment. The safety laser
scanner switches all safety outputs to the OFF state if a contour does not match the set
parameters, because, for example, the mounting of the safety laser scanner has been
changed.
Drawing a reference contour field
1.
Select the tool for drawing reference contour fields.
2.
Draw a line along the spatial contour as a reference.
b
First, use the mouse to click the desired contour.
b
Click to add the corners of the contour.
b
Finally, double-click the contour.
✓
The reference contour field is displayed.
7
CONFIGURATION
116
O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O
8025424/1ELL/2022-01-21 | SICK
Subject to change without notice
