SICK LMS500-20000 PRO Indoor, Руководство по эксплуатации

Страница: 64 / 98

Maintenance
64
© SICK AG · Division Auto Ident · Germany · Subject to change without notice
8013796/UL20/2010-09-27
Operating Instructions
Laser Measurement Systems of the LMS500 Product Family
Chapter 7
7
Maintenance
Claims under the warranty rendered void!
The housing screws of the LMS are sealed. Claims under the warranty against SICK AG will
be rendered void if the seals are damaged or the device opened. The housing is only allowed
to be opened by authorised service personnel.
7.1 Maintenance during operation
7.1.1 Cleaning the front screen
The LMS laser measurement system is largely maintenance-free. The front screen on the
LMS should however be regularly cleaned and also if contaminated.
Do not use aggressive detergents.
Do not use abrasive cleaning agents.
Important Static charges cause dust particles to be attracted to the front screen. You reduce this
effect by using the antistatic plastic cleaner (SICK part no. 5600006) and the SICK lens
cloth (part no. 4003353) (see
section 10.3.1 “Consumables” on page 95 ).
How to clean the front screen:
Use a clean and soft brush to remove dust from the front screen.
Then wipe the view window of the front screen with a clean and damp cloth.
7.2 Exchanging an LMS
As all external cable connections end in the system plug or in the plug connectors, it is not
necessary to re-install the device electrically on a device replacement. The replacement unit
can then be simply connected.
If the LMS is to be replaced, proceed as follows:
1. Switch off the voltage supply for the LMS.
2. Remove the connection cable/s from the LMS.
3. Mount the replacement device (see
chapter 4 “Mounting” on page 39 ).
4. Configuring a replacement device (see chapter 6 “Commissioning and configuration”
on page 58 ).