Sices GC600 Mains, Руководство пользователя

Страница: 9 / 33

User manual GC600-GC600
Mains
7
Pushbuttons Function
STOP
Ref. 1e
Used to control the stop of the engine in “MAN” mode.
The button can be configured in two ways:
1. Stop of the engine in AUTO , TEST or REMOTE START mode with
the activation of a lockout.
2. No function. The enabling of the button in AUTO , TEST or REMOTE
START is irrelevant.
Pressed with the Gen-set control module in OFF/RESET mode, runs the
LAMP TEST on all the indicator lights. When the Gen-set control module is
activated, keeping it pressed at the same time as the START button
allows access to the special functions.
6.3
It is possible to modify the brightness of the indicators (all together) using parameter P.0496 : the higher the
parameter value, the higher the brightness of the indicators. The value can be set between 1 and 10 (default
value= 5).
Led off LED steady ON LED flashing
  
Signalling Function
Ref. 2c
PROGRAM
OFF/RESET

Indicates that the operation mode is OFF/RESET

Indicates that you are accessing the PROGRAMMING menu

The Gen-set control module is in another operating mode.
Ref. 2c
MANUAL

Indicates that the operation mode is MANUAL

The Gen-set control module is in another operating mode.
Ref. 2c
AUTO
TEST

Indicates that the operation mode is AUTOMATIC

Flashing at 50% indicates that the operating mode is TEST
Flashing at 90% indicates that the operating mode is REMOTE
START.

The Gen-set control module is in another operating mode.
Ref. 2a
ALARM

Indicates the presence of at least one lockout or power-off.

Signals at least one warning which has not yet been
acknowledged with the “
ACK/ENTER
” button.

No warnings.
INTERFACE
ECU STATUS

Indicates that the CAN-BUS interface is ON and in ERROR-
ACTIVE mode. (J1939 o MTU).