User manual GC600-GC600
Mains
5
Pushbuttons
Function
Esc/SHIFT
Ref. 1b
In programming mode, it cancels the changes made to a variable value, brings
up the previous menu level, or exits programming mode. If it is pressed for at
least two seconds in any menu, you exit the programming mode retaining the
current menu position for further programming access.
Depending on the selected page, if pressed together with the
ENTER
button for at least 5 seconds while in
OFF/RESET
mode, it can reset counters
to zero, reload default values of the programming parameters or cancel history
logs (in addition, the
CANBUS
equipped model allows to force exit from
BUS
OFF
mode). When used during the keyboard regulation function, it aborts the
function.
If it is pressed in any window, it displays the status information on the upper
line (displaying them cyclically).
When the
HELP
information is available in the display pages, the
HELP
message will be displayed on the bottom bar, by pressing the button and hold.
UP/DOWN
LEFT/RIGHT
Ref. 1c
Navigation buttons of the multifunction display. They allow selecting previous
and following pages of the LCD display (except for
PROGRAM
and
HISTORY LOG
mode).
Horizontal navigation buttons:
In the
PROGRAM
mode, they are used to
place the cursor during the string insertion phase.
The horizontal buttons, combined with the button
EXIT/SHIFT
allow
to regulate the contrast.
To decrease the contrast (lighten), press the combination of buttons
Esc/SHIFT
+
LEFT
.
To increase the contrast (darken), press the combination of buttons
Esc/SHIFT
+
RIGHT
.
Vertical navigation buttons:
In
PROGRAM
and
HISTORY
LOGS mode
you can scroll the menus and the variables/settings. You can
increase/decrease the value of the variable to change the settings. Used in
combination with the
Esc/SHIFT
button you can scroll through the
menu ten entries at a time or increase/decrease the variables ten units at a
time.
ENTER/ACK
Ref. 1d
In the PROGRAM menu, you can enter the programming mode and open a
submenu, change a variable or parameter, and confirm the operation.
In the LOG menu, you can activate the
HISTORY LOG
function and open the
selected log, “acknowledge” any EEPROM errors at power-up.
Upon the occurrence of an alarm or lockout, the pressing of the button
recognizes the presence of an error and turns off the siren. A further press of
the button resets any alarm signals if the operating conditions have returned
to normal. Lockout signals can only be reset by activating the "OFF/RESET"
mode.
