LCR-Reader-MP Manual
Siborg Systems Inc.
19
9.2
If there are no initial zero readings on the screen
a.
From the system menu, select Default.
b.
Clean the contacts and calibrate with both closed and open probes.
c.
Review this manual to find possible errors in operating the device.
9.3
Technical Support
Customers can contact customer support by phone +1-519-888-9906 or by e-mail [email protected].
When contacting technical support, please provide the following information:
•
Model number
•
Serial number of the device
•
Software version number
10 Maintenance
10.1
Care of the surface
a.
Do not expose housing to water, it is not waterproof.
b.
Do not expose the display for a long period of time to direct sunlight.
c.
Use a soft cloth dampened with water to clean the outside surface and cleaning the LCD display
device.
d.
Do not use liquid solvents or detergents.
10.2
Repairs
If there is an unexpected measurement result, check the quality of the contact between the tips of the
device probes and the element being examined. Make sure you make the measurements correctly.
Carry out the instrument diagnostics. Not allowed independent dismantling of the case, replacement of
individual elements and circuits. For repair, please contact the manufacturer.
11 Storage Conditions
•
Temperature and humidity during storage: -10 ° C to 50 ° C with relative humidity <80%.
•
There should be no dust, acid and alkali vapours in the storage room.
•
Recharge the built-in battery once every 6 months.
12 Transportation
All modes of transportation at ambient temperatures from -40 ° C to
+ 50 ° С
The device must be protected against precipitation and dust.
Содержание LCR-Reader-MP
Страница 1: ......
