Siborg LCR-Reader-MP, Руководство пользователя

Страница: 5 / 27

LCR-Reader-MP Manual Siborg Systems Inc. 4
1 Device Use
1.1 Main Features
•
Automatic component recognition L-C-R-Diode
•
Basic Accuracy of 0.1%
•
DC measurement of Resistance and Capacitance up to 1 F
•
Pass/No Pass Electrolyte Cap indication with Built-in Rejection table
•
Automatic/manual frequency setting 100Hz, 10 Hz, 1kHz, 10 kHz, 100 kHz
•
Automatic adjustment of test signal to 0.1 V peak-to-peak for in-circuit measurements
•
Designated ESR measurements
•
Easy Open/Short calibration for better accuracy
•
Automatic detection of diode polarity and short circuits
•
DC voltage measurements with automatic polarity detection
•
Frequency meter
•
Oscilloscope graphics for alternating voltage measurements
•
Jog-dial control wheel
•
Multiple Parameter Display: primary/secondary, etc.
•
Screen orientation Automatic/Manually
•
Sound indication
•
Battery discharge warning, full charge indication
•
Automatic power off when not in use
•
Backlit LCD
2 What is included in the package
•
LCR-Reader MP
•
Case
•
Offset Calibration Board
•
Spare Ergonomic Bent Test Leads*
•
Spare Battery*
•
Kelvin Probe Connector*
*
Optional Accessories
3 Symbols and Abbreviations
DUT – Device Under Test
ESR - Equivalent Series Resistance
Low ESR - Ultralow Equivalent Series Resistance
Rs - Series Resistance
Ls - Inductance in series connection
Cs - Capacitance in Series Connection
Xs - Reactance in Series connection
Rp - Resistance in Parallel connection
Lp - Inductance in Parallel Connection
Cp - Capacitance in Parallel Connection
Xp - Reactance in Parallel Connection