LCR-Reader-MP Manual
Siborg Systems Inc.
15
7.4
The Voltage mode
This mode is to measure DC and AC voltage. The device automatically detects the polarity of the DC
voltage. The upper line of the display shows the values of the RMS voltage. The second line shows the
peak-to-peak voltage range.
7.4.1
Controls
• Clockwise
for 1 beep turns on (off) the current measurement mode.
In this mode, the voltage value measured on the external resistors (shunts) is converted into a current
and displayed on the screen. In the upper line of the screen the resistance is displayed, taking into
account the input resistance of the device, and the lower value of the current. To enter the resistance of
the shunt into the instrument memory, go to the RDC+LED mode. With the circuit de-energized, connect
the shunt and press the switch, hold for 2 beeps.
• Anti
-clockwise for 1 beep to turn on and off the capture mode of the maximum and minimum voltage
values.
• Clockwise
for 2 beeps to calibrate with short probes to eliminate the offset. The switch must be in
position 1 in order to do the calibration (see Section 6.3 Extended Voltage Range Switch).
Содержание LCR-Reader-MP
Страница 1: ......
