Siborg LCR-Reader-MP, Руководство пользователя

Страница: 22 / 27

LCR-Reader-MP Manual Siborg Systems Inc. 21
Waveform Sine, Square, Triangle
Maximum Frequency 100 kHz
* with the input impedance of the device 1 kOhm
** depending on the position of the extended voltage measurement range switch
14.2 FCC Compliance
Complies with ICES-003 Issue 6 and FCC Part 15.109.
ETC Report produced by MPB Technologies No.: s57e17a242 Release 1 of August 30, 2017.
14.3 General Information
Type of Indicator Monochrome graphic LCD display with backlight
Power Battery Lithium-Polymer (Li-Poli) 3.7V 250 mAh
Typical Recharge Time 2.5 hours
Continuous Operating Time Over 8 hours (non-illuminated display)
Auto-off 10 - 990 seconds (default 120s)
Use Conditions 10 - 40⁰С and relative humidity up to 80%
Dimensions Device 180x30x16mm
Case 205x80x25mm
Unit Weight 45 g
Weight of the Device and Case 103 g
14.4 Details of the Measurement Modes
14.4.1 Test Signal Generator
Test Frequency
50Hz, 100Hz, 120Hz, 1kHz,
10kHz, 20kHz, 30kHz,
40kHz,50kHz, 60kHz, 75kHz
100kHz Constant Pressure
Frequency Setting Accuracy 0.01% 1.5% -
Test Signal Level 0.65±0.05 Vrms*, 0.1±0.01 Vrms, 0.1±0.01 V** ±(n±0.1) V,
where n=1.2,1.5,2.7
Output Impedance 1000 Ohm
* At the test frequency 30 kHz ± 0.53±0,04 Vrms.
**No manual selection of the signal level, measurement accuracy 10% + 5.
14.4.2 Resistance
Range Resolution Level
Test Frequency
Equivalent
Circuit
100 Hz, 120 Hz 1 kHz 10kHz 20kHz-100kHz
10Ω 0.001Ω 0.1Vrms - - - - Series
0.65 Vrms 1%+20 0.5%+20 0.5%+20 1%+20
100Ω 0.01Ω 0.1Vrms 2%+3 1%+3 1%+3 3%+3 Series
0.65 Vrms 1%+3 0.3%+3 0.3%+3 1%+3
1кΩ 0.1Ω 0.1Vrms 1%+5 0.5%+5 1%+5 2%+5 Series
0.65 Vrms 0.5%+2 0.2%+2 0.2%+2 0.5%+2
10кΩ 0.001кΩ 0.1Vrms 1%+5 0.5%+5 1%+5 1%+5 Series,
Parallel
0.65 Vrms 0.5%+2 0.2%+2 0.2%+2 0.5%+2
100кΩ 0.01кΩ 0.1Vrms 1%+5 0.5%+5 1%+5 1%+5 Parallel