Sibata 080040-710, Руководство по эксплуатации

Страница: 45 / 62

- 43 -
W a i t i n g
S e t
S t a r t T i m e
4
1 8 : 0 0 : 0 0
0 6 / 0 0 2 /
Sampling Start Stanby
Main Screen
[1] Waiting Time Remaining (Remaining Time Until Sampling Start)
The time until sampling starts after the pump
started up is displayed.
When "OVER" is displayed on the 3rd line,
this indicates that the time has exceeded 999
hours and 59 minutes.
[2] Waiting Set ON Time (ON Timer Set Value)
Either of the ON timers - Delay Time and
Start Time - preset at "Select Timer" is
displayed. The figure on the right is a
display example when "Start Time" is
selected.
Main Menu
3 Setup (Setting)
When "3 Setup" is selected in the main menu, the following sub-menu is displayed. Select
the menu in the same way as for the main menu. Press the [MENU/ESCAPE] key several
times according to the screen display until the display returns to the main screen.
Setup Menu Display
Display Description
1 Set Flow Rate Displays the present flow rate.
2 Set ON Time Sets the ON timer.
3 Set OFF Time Sets the OFF timer.

Set Flow Rate (Auction Flow Rare Set Value)
When "1 Set Flow Rate" is selected and the [ENTER] key is pressed, the preset flow
rate is displayed.

Set ON Time (ON Timer Set Value)
When "2 Set ON Time" is selected and the [ENTER] key is pressed, either of the ON
timers - Delay Time and Start Time - preset at "Select Timer" is displayed.

Set OFF Time (OFF Timer Set Value)
When "3 Set OFF Time" is selected and the [ENTER] key is pressed, one of the OFF
timers -
Run Time, Stop Time and Total Volume - preset at "Select Timer" is displayed.
W a i t i n g
T i m e
R e m a i n i n g
O V E R
h r s m i n
9 9 9 9.5