-
21
-
Sampling Method
(Basic Operations)
This chapter describes the basic operations for running this sampler. For detailed
operations, or functions not described in this chapter, see the following chapters.
1. Turn the [POWER] switch key to the
ON position. When the power is turned
ON, the version is displayed, followed
by the main screen as shown on the
right. In this state, press the
[MENU/ESCAPE] key.
2. The main menu is displayed. Press the
［
UP
］
Key and the
［
DOWN
］
key.
At this item, press the
［
ENTER
］
key.
3. The Setup sub-menu is displayed as
shown on the right.
Suction Flow Rate Setting
1. Press the [UP] and [DOWN] keys to select "1 Set Flow Rate," and press the
[ENTER] key.
2. The current suction flow rate setting is
displayed highlighted as shown in the
figure on the right. Press the [UP]
and [DOWN] keys to
increment/decrement the set value in
0.1 L/min units. When the desired
setting value is set, be sure to press
the [ENTER] key. The newly set
value is entered, and the screen
returns to the Setup sub-menu.
* After setting a new value, if the [MENU/ESCAPE] key is pressed before the
[ENTER] key is pressed, the screen will return to the Setup sub-menu without the
newly entered value being accepted.
1 L a s t
D a t a
2 C u r r e n t
D a t a
3
S e t u p
4 P r e v i o
u s
D a t a
5 C l e a r
L o g s
6 T e s t
7 C a l i b r a t i o n
S e t u p
1
S e t
F l o w
R a t e
2 S e t
O N
T i m e
3 S e t
O F F
T i m e
4 S e t
D a t e
&
T i m e
5 S e l e c t
T i m e r
6 S e t
F l o w
U n i t
7 S e t
F a u l t
S t o p
S e t u p
S e t
F l o w
R a t e
L / m i n
A c t u a l
V F
1 6.7
S e t u p
S e t
F l o w
R a t e
L / m i n
A c t u a l
V F
1 6.7
