Shuttle Omninas KD21, Руководство пользователя

Страница: 66 / 170

English English
3-17
s
toraGe
M
anaGeMent
w
eb
i
nterFace
IMPORTANT:
Changing RAID types erases all data stored on your storage disks. If there is saved data
on the drive(s), backup your data before proceeding.
IMPORTANT:
Only RAID 1 supports hot-swap functionality. All other modes require you to power down
the device before removal of hard drives.
The Disk Manager function displays model, capacity and status of the available hard drives. You
can view the health status, remove, check, format, and unmount a disk drive.
Creating a RAID Mode
IMPORTANT:
Changing RAID types erases all data stored on your storage disks. If there is saved data
on the drive(s), backup your data before proceeding.
In Single Disk mode, a second drive can be inserted. The device recognizes the new drive
as an external disk.
Prerequisites:
• Single: Install one hard disk drive
• JBOD, RAID 0, RAID 1: Install two hard disk drives
Note:
Single mode supports the installation of a second drive (external disk).
1. Select Storage and click on the RAID Manager tab.
The current RAID mode is displayed above the available RAID modes, see the following
figure.
2. Click on a RAID mode, see RAID Types to select your preference.