Shop fox W1876, Руководство пользователя

Страница: 38 / 52

Straightedge
Outfeed Table Infeed Table
Figure.37. Infeed and outfeed table height
set evenly.
Figure.36.
Leveling adjuster.
Black Lines Represent
Straightedge Positions
from Overhead View
Figure.38. Straightedge positions for
checking infeed/outfeed table parallelism.
Black Lines Represent
Straightedge Positions
from Overhead View
Figure.35. Straightedge positions for
checking outfeed table parallelism.
-36-
Model W1876 (For Machines Mfd. Since 7/20)
SE
RV
IC
E
3.
Place straightedge in one of the positions shown in
Figure.35 .
4.
Use a flat head screwdriver to rotate leveling
adjuster(s) (see
Figure.36
) under straightedge until
straightedge touches cutterhead body while lying
flat across outfeed table.
Note: Rotate leveling adjusters clockwise to lift
table, and counterclockwise to lower table.
5.
Repeat
Step.4
with each remaining straightedge
position as many times as necessary until outfeed
table is parallel with cutterhead.
6.
Place straightedge halfway across infeed and outfeed
tables, and adjust infeed table height even with
outfeed table, as shown in
Figure.37
.
Note:
Infeed table depth-of-cut scale should be set
at "0".
7. Access infeed table leveling adjusters by removing
(4) cap screws w/washers from table openings.
8.
Place straightedge in one of the positions shown
in Figure.38 , and rotate leveling adjuster(s) under
straightedge until straightedge lies flat across both
tables.
9. Repeat Step.8. with each remaining straightedge
position as many times as necessary until infeed
table is parallel with outfeed table.
10. Install cap screws w/washers removed in Steps.2. & .7.
in infeed and outfeed table openings.